# Automated Frequency Response Test locks Into A Loop

**URL:** <https://forum.quantasylum.com/t/automated-frequency-response-test-locks-into-a-loop/2415>\
**Category:** Uncategorized\
**Created:** [October 19, 2026, 3:07pm UTC](https://forum.quantasylum.com/t/automated-frequency-response-test-locks-into-a-loop/2415 "2026-10-19T15:07:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rammis](https://avatars.discourse-cdn.com/v4/letter/r/59ef9b/32.png) [@Rammis](https://forum.quantasylum.com/u/Rammis)\
**Post date:** [October 19, 2026, 3:07pm UTC](https://forum.quantasylum.com/t/automated-frequency-response-test-locks-into-a-loop/2415/1 "2026-10-19T15:07:49Z")

</div>

This has cropped up several times and sometimes “cured” itself mysteriously - when running the AMP Frequency Response automated test, the test just continuously loops and doesn’t stop after one cycle to show the resulting plot. I’ve tried to nail down something to stop this behavior to no avail. Of course this behavior never yields a useful plot.

Could this be a bug somewhere in the software? Reinstalling the software and creating another test template doesn’t cure this behavior. I always run the latest version of the software.