# Power / Wattage measurement

**URL:** <https://forum.quantasylum.com/t/power-wattage-measurement/812>\
**Category:** Uncategorized\
**Created:** [February 7, 2023, 10:41pm UTC](https://forum.quantasylum.com/t/power-wattage-measurement/812 "2023-02-07T22:41:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tonywood](https://avatars.discourse-cdn.com/v4/letter/t/0ea827/32.png) [@Tonywood](https://forum.quantasylum.com/u/Tonywood)\
**Post date:** [February 7, 2023, 10:41pm UTC](https://forum.quantasylum.com/t/power-wattage-measurement/812/1 "2023-02-07T22:41:54Z")

</div>

I’m wondering if a wattage (voltage pk-pk, rms, impedance) / output power tab could be added to measurements? I use dbv and convert it. I test some odd frequencies and it would be nice to not have to convert it for power output of the amplifier under test. This might already be in measurements somewhere and I’ve missed it.

Thank you

---

<div class="post-metadata">

**Author:** ![Claudio](https://avatars.discourse-cdn.com/v4/letter/c/7cd45c/32.png) [@Claudio](https://forum.quantasylum.com/u/Claudio)\
**Post date:** [February 8, 2023, 5:21am UTC](https://forum.quantasylum.com/t/power-wattage-measurement/812/2 "2023-02-08T05:21:52Z")

</div>

> [@Tonywood](#):
>
> I’m wondering if a wattage (voltage pk-pk, rms, impedance) / output power tab could be added to measurements?

Hi. Perhaps you are referring to the ‘Pk Pwr Watt’ measurement. This gives the power measured on the load set in the context menu of “dbV”.

---

<div class="post-metadata">

**Author:** ![VAR](https://yyz2.discourse-cdn.com/flex032/user_avatar/forum.quantasylum.com/var/32/959_2.png) [@VAR](https://forum.quantasylum.com/u/VAR)\
**Post date:** [February 8, 2023, 5:23am UTC](https://forum.quantasylum.com/t/power-wattage-measurement/812/3 "2023-02-08T05:23:15Z")

</div>

Both Peak power and RMS power can be found in the add measurement tab:

 ![image](https://canada1.discourse-cdn.com/flex032/uploads/quantasylum/original/2X/0/0ef5e461c63f74ef8337a9b5330f6814c8e238a9.png)

I am not sure if that is what you were getting at…

---

<div class="post-metadata">

**Author:** ![Tonywood](https://avatars.discourse-cdn.com/v4/letter/t/0ea827/32.png) [@Tonywood](https://forum.quantasylum.com/u/Tonywood)\
**Post date:** [February 8, 2023, 6:45pm UTC](https://forum.quantasylum.com/t/power-wattage-measurement/812/4 "2023-02-08T18:45:02Z")

</div>

Awesome! That’s what I was looking for. You guys are great!