# QA403 left output problem

**URL:** <https://forum.quantasylum.com/t/qa403-left-output-problem/1948>\
**Category:** QA40x\
**Created:** [June 29, 2025, 4:45pm UTC](https://forum.quantasylum.com/t/qa403-left-output-problem/1948 "2025-06-29T16:45:05Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![antoine](https://avatars.discourse-cdn.com/v4/letter/a/7ab992/32.png) [@antoine](https://forum.quantasylum.com/u/antoine)\
**Post date:** [June 29, 2025, 4:45pm UTC](https://forum.quantasylum.com/t/qa403-left-output-problem/1948/1 "2025-06-29T16:45:05Z")

</div>

Hello!  
I noticed that the left output of my QA403 (+ and -) is very low. When connect outputs to the inputs of the device and send a 1kHz sine wave, I’ve got this:

 ![qa403](https://canada1.discourse-cdn.com/flex032/uploads/quantasylum/original/2X/d/d0ad53d280a55c4ba45b040053fa97dfbbaa8920.png)  
I of course swapped channels, change cables, and the issue comes from the left output.  
Has anybody an idea of what would the problem?

Antoine

---

<div class="post-metadata">

**Author:** ![restorer-john](https://avatars.discourse-cdn.com/v4/letter/r/b5a626/32.png) [@restorer-john](https://forum.quantasylum.com/u/restorer-john)\
**Post date:** [June 30, 2025, 5:39am UTC](https://forum.quantasylum.com/t/qa403-left-output-problem/1948/2 "2025-06-30T05:39:26Z")

</div>

You should be seeing this:

 ![image](https://canada1.discourse-cdn.com/flex032/uploads/quantasylum/original/2X/c/c448f56a08b549e22d5f759942b2bbde5b48cc21.png)

What happens if you send the left output to right input- is the -67.57dB the same? You don’t have shorting plugs on your outputs do you?

If you are connecting via differential, are your hots and colds all wired correctly? It could almost be a cancellation at -68dB.

---

<div class="post-metadata">

**Author:** ![antoine](https://avatars.discourse-cdn.com/v4/letter/a/7ab992/32.png) [@antoine](https://forum.quantasylum.com/u/antoine)\
**Post date:** [June 30, 2025, 7:17am UTC](https://forum.quantasylum.com/t/qa403-left-output-problem/1948/3 "2025-06-30T07:17:13Z")

</div>

When feed the right input with the left output, the -68dB is on the right in:

 ![qa403_LRswapped](https://canada1.discourse-cdn.com/flex032/uploads/quantasylum/original/2X/6/6fbb3d42f1b8e0694826546a48e4c2bbe3ba35ed.png)  
I dont have shorting plugs on the outputs, I use small BNC cables to connect outs to ins, and the problem is the same either with hot or cold output.  
In balanced mode, I’ve only got the usual +6dB:

---

<div class="post-metadata">

**Author:** ![antoine](https://avatars.discourse-cdn.com/v4/letter/a/7ab992/32.png) [@antoine](https://forum.quantasylum.com/u/antoine)\
**Post date:** [June 30, 2025, 7:17am UTC](https://forum.quantasylum.com/t/qa403-left-output-problem/1948/4 "2025-06-30T07:17:45Z")

</div>

![qa403_balanced](https://canada1.discourse-cdn.com/flex032/uploads/quantasylum/original/2X/0/0856fe56c3af5fe9da923532037732bb5bc3b4cd.png)

---

<div class="post-metadata">

**Author:** ![restorer-john](https://avatars.discourse-cdn.com/v4/letter/r/b5a626/32.png) [@restorer-john](https://forum.quantasylum.com/u/restorer-john)\
**Post date:** [June 30, 2025, 10:05am UTC](https://forum.quantasylum.com/t/qa403-left-output-problem/1948/5 "2025-06-30T10:05:39Z")

</div>

I would suggest contacting @matt and asking for his advice/suggestions. It looks like you may have a left channel gen output issue than may need investigation. Cheers.

---

<div class="post-metadata">

**Author:** ![antoine](https://avatars.discourse-cdn.com/v4/letter/a/7ab992/32.png) [@antoine](https://forum.quantasylum.com/u/antoine)\
**Post date:** [June 30, 2025, 3:05pm UTC](https://forum.quantasylum.com/t/qa403-left-output-problem/1948/6 "2025-06-30T15:05:06Z")

</div>

ok thank you! I will contact him.
