# Testing X-Plot Response **URL:** \ **Category:** Uncategorized\ **Created:** [June 9, 2025, 2:19pm UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919 "2025-06-09T14:19:09Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Frunse](https://avatars.discourse-cdn.com/v4/letter/f/5daacb/32.png) [@Frunse](https://forum.quantasylum.com/u/Frunse)\ **Post date:** [June 9, 2025, 2:19pm UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919/1 "2025-06-09T14:19:09Z")
Tested it, but the Generator selection didn’t work, my ears brocke away even if i select 0.05 V ouput Voltage it goes @ full Power!!! i need to stop that. Also if i hit the 0.05 selection it shows me 5 V ---
**Author:** ![YamahaCA](https://avatars.discourse-cdn.com/v4/letter/y/57b2e6/32.png) [@YamahaCA](https://forum.quantasylum.com/u/YamahaCA)\ **Post date:** [June 10, 2025, 6:41pm UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919/2 "2025-06-10T18:41:19Z")
You should start with understanding the maximum input specification for the DUT ---
**Author:** ![Frunse](https://avatars.discourse-cdn.com/v4/letter/f/5daacb/32.png) [@Frunse](https://forum.quantasylum.com/u/Frunse)\ **Post date:** [June 10, 2025, 6:56pm UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919/3 "2025-06-10T18:56:50Z")
What you talking about it was an Error in Software, MarkZ has alredy repaired it and the Voltage settings working right now!!! if i hit @ 0.05 V and it switched to 5V thats not funny dude!!! ---
**Author:** ![YamahaCA](https://avatars.discourse-cdn.com/v4/letter/y/57b2e6/32.png) [@YamahaCA](https://forum.quantasylum.com/u/YamahaCA)\ **Post date:** [June 10, 2025, 9:12pm UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919/4 "2025-06-10T21:12:57Z")
My reply was not intended to be funny or sarcastic. It is simply a good idea to check the working parameters of the input. If this is a LINE-IN signal the operating parameters are DUI specific. It is very possible that if you have run 5v into the source you may have created some additional damage. ---
**Author:** ![BarryLambert](https://avatars.discourse-cdn.com/v4/letter/b/779978/32.png) [@BarryLambert](https://forum.quantasylum.com/u/BarryLambert)\ **Post date:** [June 10, 2025, 9:59pm UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919/5 "2025-06-10T21:59:12Z")
@YamahaCA .. I agree but if you follow the actual thread where this problem was being dealt with, it’s not this thread. There WAS an issue with QA40XPlot that was causing Frunse’s over voltage problem which has been fixed by the developer Mark Z. It is all in the QA40xPlot thread. I think Frunse posted here in error ---
**Author:** ![Frunse](https://avatars.discourse-cdn.com/v4/letter/f/5daacb/32.png) [@Frunse](https://forum.quantasylum.com/u/Frunse)\ **Post date:** [June 11, 2025, 8:56am UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919/6 "2025-06-11T08:56:14Z")
Ok no damage aplied i used the Amp already with this Speaker and the Measurments looking like before, so no damage there, i stopped the Signal as fast i realized it is to loud. ---
**Author:** ![Frunse](https://avatars.discourse-cdn.com/v4/letter/f/5daacb/32.png) [@Frunse](https://forum.quantasylum.com/u/Frunse)\ **Post date:** [June 11, 2025, 8:57am UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919/7 "2025-06-11T08:57:37Z")
yes not sure how it comes to this Thread clickt on wrong Buttons i guess LOL ---
**Author:** ![restorer-john](https://avatars.discourse-cdn.com/v4/letter/r/b5a626/32.png) [@restorer-john](https://forum.quantasylum.com/u/restorer-john)\ **Post date:** [June 11, 2025, 9:27am UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919/8 "2025-06-11T09:27:53Z")
@Frunse This entire thread should be posted as comments in the unofficial (but awesome) QA40xPlot thread. ---
**Author:** ![Frunse](https://avatars.discourse-cdn.com/v4/letter/f/5daacb/32.png) [@Frunse](https://forum.quantasylum.com/u/Frunse)\ **Post date:** [June 11, 2025, 9:56am UTC](https://forum.quantasylum.com/t/testing-x-plot-response/1919/9 "2025-06-11T09:56:54Z")
Yes i tried to answer MarkZ and than it was in the new Thread here, than i did the same Post @ MarkZ thread LOL How to delete this???