# Where is add measurement in QA1.92

**URL:** <https://forum.quantasylum.com/t/where-is-add-measurement-in-qa1-92/967>\
**Category:** QA401\
**Created:** [August 8, 2023, 4:17pm UTC](https://forum.quantasylum.com/t/where-is-add-measurement-in-qa1-92/967 "2023-08-08T16:17:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pwm](https://avatars.discourse-cdn.com/v4/letter/p/b77776/32.png) [@pwm](https://forum.quantasylum.com/u/pwm)\
**Post date:** [August 8, 2023, 4:17pm UTC](https://forum.quantasylum.com/t/where-is-add-measurement-in-qa1-92/967/1 "2023-08-08T16:17:57Z")

</div>

Where can I add a measurement in QA1.92? I would like to add a power measurement with a specific load impedance.

---

<div class="post-metadata">

**Author:** ![matt](https://avatars.discourse-cdn.com/v4/letter/m/a6a055/32.png) [@matt](https://forum.quantasylum.com/u/matt)\
**Post date:** [August 8, 2023, 6:54pm UTC](https://forum.quantasylum.com/t/where-is-add-measurement-in-qa1-92/967/2 "2023-08-08T18:54:12Z")

</div>

Hi @pwm, 1.92 is for the QA401, and so for that you’d go to the DBV context menu (Control + click on dBV button in AXIS SETTINGS. And then, specify your Load Impedance and also click that you’d like to display Watts instead of Vrms.

---

<div class="post-metadata">

**Author:** ![pwm](https://avatars.discourse-cdn.com/v4/letter/p/b77776/32.png) [@pwm](https://forum.quantasylum.com/u/pwm)\
**Post date:** [August 8, 2023, 7:33pm UTC](https://forum.quantasylum.com/t/where-is-add-measurement-in-qa1-92/967/3 "2023-08-08T19:33:38Z")

</div>

Thanks Matt! There appears to be lots of differences in the various versions of software.