Is it possible to run the QA462 stand-alone, that is, using it with a third-party analyzer to graph output voltage and current and construct an impedance graph? It is not clear to me whether the '462 is controlled by the 40x software or whether it has it’s own control software to set the various options.
Jan
Hello Jan
The QA462 runs completely stand-alone, no need of a PC to control it. The gain is fixed at +20dB andthe current sense resistor (20 mOhm / 200 mOhm / 2 Ohm) is controlled from the front panel. Unlike other QA products, QA462 is not powered from USB but from a proper 12V power supply.
Best regards Andy
Thanks Andy, very useful info!
Jan